One question I hear from time to time from Omniture SiteCatalyst users is:  “What are the paths visitors take on my site when they are successful in reaching one of my desired Success Events?”  Basically, on most websites, there are a few ideal paths that you wish all visitors would take.  Unfortunately, most visitors don’t adhere to your ideal path so you need to see what paths they are choosing to take.  Of course, you can use Pathing reports to see all of the paths that visitors are taking, but that can be very cluttered and hide what is really happening related to Success Events.  Therefore, one interesting analysis you can do is to focus only on paths that do lead to success.  I equate this to the old “cow path” story where architects would wait to create sidewalks in front of new buildings to see where people naturally walked and then build the sidewalks where people are already going.  In this post I will show you how you can do this in SiteCatalyst.

But I Don’t Have Discover or Insight?
When I raise this topic, the first thing people say is that they can’t do this because they don’t have Omniture Discover or Omniture Insight.  While those products are great and I highly recommend them, the good news here is that you don’t need those tools to see the paths that lead to success.  In fact, due to a current Discover limitation (more info on this later on), you cannot do this analysis in Discover, but you can do it easily in Omniture Insight.  The one thing you will need to perform this analysis, however, is Advanced Segment Insight (ASI).

So How Do I Do It?
The key to this solution is the Full Paths report in SiteCatalyst.  Normally, this report is a tad boring since there are so many unique paths on a site that beyond ENTER>>HOME PAGE>>EXIT, the rest of the percentages are usually pretty slim (i.e. .1% of all paths).  However, if you could look at this report for a small subset of your website audience, the percentages should go up dramatically.  This can be done with ASI, where you create an entire new data set for a specific segment.  Once you have created your segment and run your ASI slot, you have access to all SiteCatalyst reports, including the Full Paths report.  Hence, all you need to do is to properly identify a segment containing a Success Event, run your ASI slot and then look at the Full Paths report.

The way I start this is by identifying the Success Event that I care about.  Let’s say that you want to see a segment of “Purchasers.”  In this case the only Visits you want to include in the segment are those that have completed an Order within the Visit (feel free to review Segmentation  in my old post):

Once you have created this segment, you now create an ASI slot for, say, 30 days of data (amount of days is up to you).  When the ASI slot has completed processing, you can open the Full Paths report and see which paths are the most popular and include an Order:

I have found it fascinating to extract these paths and look for common trends.  It is often like finding needles in a haystack!  The best part, is that after you have learned what you want to learn, you can delete the ASI slot and re-create it for a different segment.  Here are a few examples you can create:

• View all paths that led to an Order, but only when the visitor was a first time visitor
• View all paths that led to an Order, but only when the visitor was a return visitor
• View all paths that led to an Order that was greater than $100
• View all paths that used a Product Finder and led to an Order
• Etc…

Just remember the formula.  Create segment, run ASI, look at Full Paths (Repeat).  The possibilities are only limited by your imagination.  I usually look at the top five paths for a bunch of different segments and then compare them to see what is common between them.

As I mentioned earlier, it would be much easier to do this analysis in Discover (where segmentation is instantaneous), but currently, there is no Full Paths report in Discover (see my idea suggestion and feel free to vote for it!).  I hope that gets into the product since then you wouldn’t have to wait a few days each time for the ASI slots to process.

What About Failure?
But wait…there’s more!  As Avinash Kaushik likes to say, one of the cool things about the web is that you can fail faster (and learn)!  Therefore, you shouldn’t just look at success, but you should also look at failure.  Why not create an ASI slot for visits where people did NOT succeed (create an Order in this case)?  Find out where people are most often taking wrong turns and maybe you can correct them.  Remember, when you perform normal Pathing analysis, you are seeing the good paths mixed with the bad paths, but with this solution, you can easily segment them out and analyze each separately.  Here is a sample segment definition you can use (notice “Exclude” – opposite of the first segment):

Well…there you have it, a quick and dirty way to see which paths lead to success (or failure).  Enjoy!

Adam Greco is the Director of Web Analytics at Salesforce.com.  You can read his previous Inside Omniture SiteCatalyst blog at http://blogs.omniture.com/author/agreco/ and can follow him on Twitter at http://twitter.com/adamgreco.  Please send questions and comments to adam@the-omni-man.com.

Please note: I am no longer an employee of Omniture and the content/views expressed here are my own and not those of Omniture.

In my last post, I described some of the benefits of using a Page View Success Event.  In this post I will continue along the same theme by describing the benefits/uses of a Page Name Conversion Variable (eVar).  I recommend you read my last post on the Page View Success Event prior to reading this post as the two go hand-in-hand.

Setting a Page Name eVar
Setting the Page Name in an eVar, while somewhat nontraditional,  can be used for many different purposes.  In this post I will cover just a few, but I am sure those reading this can come up with many more.  The implementation of this couldn’t be easier.  Simply pass the s.pagename value to an eVar and you are done!  The following sections will outline how I use this variable once it is set.

Campaign Pages
Let’s say that you are running a bunch of online marketing campaigns and you want to see how many pages on the website people coming from each Campaign Tracking Code view.  In SiteCatalyst, the main way to figure this out would be to use DataWarehouse, ASI or Discover unless you read my last post and had set a Page View Success Event.  But now let’s take it a step further.  What if you want to see the pages that visitors from each Campaign Tracking Code viewed on your website.  Easy right?  Not so fast.  There is really no easy way to see this in SiteCatalyst using out-of-the-box reports.  One way to do this would be to use the Get&Persist Plug-in to pass the Campaign Tracking Code to a Traffic Variable (sProp) on each page of the visit and then use a Traffic Data Correlation to correlate this new sProp with the Page Name variable, but that is a lot of work!  The other way is to use a Page Name eVar.  By default, your Campaign Tracking Code report will store and persist the Campaign Tracking Code for multiple page views (you choose your time frame in the Admin Console) so if you begin to store Page Names in another eVar, you will have an intersection between Page Name and Campaign Tracking Code on each page.  That allows you to use a Conversion Variable Subrelations report to see all Pages viewed by visitors coming from each Campaign Tracking Code  You can see this by opening up the Campaign Tracking Code report, selecting the Page View (Event) metric and clicking the icon next to a specific Tracking Code to break it down by the Page Name eVar.  Once you have done this, you should see a report like this:

Channel Pages Tracking
If you role up your Campaigns to higher-level Marketing Channels using SAINT Classifications you can use the concept from the Page View Event post to see how many pages are viewed on your site after visitor arrive from each Marketing Channel.

You can then break this report down by the Page Name eVar to see the most popular pages for each Marketing Channel:

While this is not as granular as viewing Pathing by Campaign (as I demonstrated in this post) , it can give you a high-level view of what pages are popular for each different marketing channel.  If you are using the Unified Sources DB VISTA Rule or Channel Manager plug-in, it gets even better as you can see what pages people coming from another website or SEO are viewing on your website by breaking down a particular SEO keyword or external website link by Page Name:

Internal Search Follow-On Pages
If you are properly tracking Internal Search on your website, you should have Internal Search Terms stored in an eVar so you can use this concept to break down Internal Search Terms by this new Page Name eVar (while using the Page View Event) to see what pages visitors view after they search on each specific Internal Search Term:

What Page Does Success Take Place?
Another side-benefit of setting a Page Name eVar is that you can see on which page a Success Event takes place.  For example, if you set a “File Download” Success Event and a file is available on several pages, you can subrelate each file name with the Page Name eVar to see which page is the most popular for downloading each file.

Conversion Variable QA
Finally, there is a completely different use for the Page Name eVar – Quality Assurance.  Often times, you will run into situations where you have eVars that have bad data or no data at all (the dreaded “None” row!).  Often times, these issues are hard to troubleshoot.  However, if you have a Page name eVar, your life is much easier.

Let’s say that you have forms on your website and when visitors complete a form, they are required to enter a “Company Size” field which is stored in an eVar.  However, there are many cases where you are seeing the Form Company Size eVar with no data.  This might mean that IT forgot to make the field required on some of the Forms (would never happen right?).  How do you figure out which forms are causing the issue?  All you have to do is the following:

1. Open the eVar report that has data issues with a relevant Success Event metric (Form Company Size and Form Completes in this example)
2. Find the row that has bad data or no data (“None” row)
3. Click the breakdown icon to break the report down by the Page Name eVar
4. The resulting report (see below) will show you a list of Page Names where SiteCatalyst set the Form Complete Success Event, but did not have a corresponding Form Company Size eVar value

You can then send this report to your IT team to help them find pages where there may be tagging issues.  You could even schedule this as a recurring report to you and IT so you are alerted when similar issues arise in the future, which helps with overall data quality.  Keep in mind that this will only work if the eVar you are looking at has Full Subrelations or you add Full Subrelations to the Page Name eVar (see below).

Final Thoughts
As you can see, there are many different uses of this functionality.  The following are some final pointers related to this topic:

1. As previously noted, if you plan to use the Page Name eVar extensively for testing, I would recommend that it have Full Subrelations so you can QA all eVar reports, not just those that already have Full Subrelations.
2. In one of the rare times I ever tell clients to do this, I would recommend that you set the Page Name eVar to expire at the Page View in the Admin Console.  Expiration beyond that will probably add little value and only slow down reporting.  There are some special things you need to do here if you use Custom Links so I would advice you speak to Omniture  Consulting about this.
3. Consider Classifying the Page Name eVar by Page Type, Page Product Category, etc… to increase the value you get from this eVar.

Adam Greco is the Director of Web Analytics at Salesforce.com.  You can read his previous Inside Omniture SiteCatalyst blog at http://blogs.omniture.com/author/agreco/ and can follow him on Twitter at http://twitter.com/adamgreco.  To be alerted to new blog posts, I recommend subscribing to this blog via e-mail using the tool provided on the top-right of this page.  Please send questions and comments to adam@the-omni-man.com.

Please note: I am no longer an employee of Omniture and the content/views expressed here are my own and not those of Omniture.

In my last post, I discussed a topic which I called Segment Pathing, which allows you to see how Pathing on your site differs by Visitor Type or Campaign Tracking Code.  In this post I will build upon this concept with one of the most popular topics in the Web Analytics field: Bounce Rates.  While I am not as enthusiastic about Bounce Rates as many others in the field, I do understand their importance and why people like them them.  However, one of my gripes with the Bounce Rate metric (which I have always defined as Single Access/Entries) is that there is not an easy way in SiteCatalyst to see Bounce Rates for different types of visitors or Campaigns.  Unless they have Omniture Discover or are experts at ASI Segments, most of the Omniture clients I worked with were primarily looking at Bounce Rates for the entire population.  While this is OK, I think we can do better than that.  In this post I will show you how I create Segment Bounce Rates.  However, to get the most out of this post, I strongly encourage you to read my prior post on Bounce Rates and my previous post on Segment Pathing before reading this post.

Segment Bounce Rates
As I just described, my goal when looking at Bounce Rates is to be able to tell my peers how visitors are bouncing off key pages based upon both the page and the segment.  In my previous post, I highlighted two segments that I commonly use: 1) Visitor Type (i.e. Customer vs. Non-Customer) and 2) Campaign Tracking Code (i.e. visitors from Google keyword A vs. Yahoo keyword B).  If I can dissect how each segment bounces off pages, I can determine if I need to create different versions of pages for each Visitor Type or Campaign Code or I can use this information to build future A/B Tests using a tool like Test&Target.  As I mentioned in my last post, this is a moot point if your organization already has Omniture Discover, but as is always the case in my blogs, my goal is to show you how to do things if you only have access to SiteCatalyst.

Implementing Segment Bounce Rates
The good news is that if you have already followed my instructions from my previous post on Segment Pathing, you are 95% of the way to being done with implementing Segment Bounce Rates!  As a quick recap, in my last post I described a process in which you concatenate the Page Name with another Traffic Variable (sProp) that contains a segmentation that you care about (i.e. Visitor Type).  Once you have these values concatenated on every page, you enable Pathing so you can see paths or pages by segment.  However, when you enable Pathing on this new sProp, you immediately gain access to the two metrics that you need to calculate Bounce Rate: Single Access & Entries.  Therefore, without even knowing it, by implementing Segment Pathing, you have also implemented Segment Bounce Rates!  All you need to do is to create the Bounce Rate Calculated Metric (which hopefully you already have as a Global Calculated Metric) and you are done.

So how do you see the results of your work?  All you need to do is to open the new concatenated sProp and add the Bounce Rate metric to the report.  In the example shown below, I will use the Campaign Pathing sProp which shows Campaign Tracking Codes concatenated with Page Names.  I will add Visits, Single Access, Entries and Bounce Rate to the report:

As you can see, the Bounce Rate for each Tracking Code/Page Name combination is displayed and you can sort by any metric you wish.

As a best practice, I like to conduct a text search filter to isolate one Page Name so I can see how the Bounce Rates differ for the same page with different Campaign Tracking Codes.  In the following example, I filtered on the phrase “:Home Page” and limited my results to see only Home Page Entries and the associated Bounce rates of each Campaign Tracking Code:

Keep in mind that I am only showing a few simple examples here and that this functionality can be extended to any segment of your choosing.  If you want to get really advanced, you could even concatenate multiple items together, such as Visitor Type + Campaign Tracking Code + Page Name.  This would allow you to see how different Visitor Types, coming from specific Campaign Tracking Codes, landing on specific Pages, navigate your site or Bounce off pages (i.e. Customer:ggl_1:Home Page).  Just don’t go too crazy since there are character limits on sProps and you don’t want to exceed the 500,000 monthly unique limits on sProps.

Final Thoughts
As you can see, you get a “two for the price of one” deal if you do all of the steps in this post and the previous post.  If you don’t have access to Omniture Discover and want to see how people navigate through your site or bounce off your site pages by specific segment, I suggest you give this a try and see if it helps you.

Adam Greco is the Director of Web Analytics at Salesforce.com.  You can read his previous Inside Omniture SiteCatalyst blog at http://blogs.omniture.com/author/agreco/ and can follow him on Twitter at http://twitter.com/adamgreco.  To be alerted to new blog posts, I recommend subscribing to this blog via e-mail using the tool provided on the top-right of this page.  Please send questions and comments to adam@the-omni-man.com.

Please note: I am no longer an employee of Omniture and the content/views expressed here are my own and not those of Omniture.

In past blog posts I have discussed SiteCatalyst Pathing Analysis in general and some specific examples (i.e. Success Event Pathing).  In this post, I will share a more advanced technique I call Segment Pathing which is often used to extend the capabilities of Pathing Analysis.  While this technique can be used in many different ways, I will use Visitor Type Pathing as the primary example and way to explain the concept.

What Is Segment Pathing?
Most of you are probably familiar with the idea of Pathing and that SiteCatalyst Pathing Analysis tracks the order in which a visitor looks at pages, sections or anything else on your site.  As such, it is normal to pass a page name or section name value to a Traffic Variable (sProp) so you can then enable Pathing.  However, there are often cases where you want to see how different segments of your visitors navigate through your site.  For example, what pages do New Yorkers look at first vs. those from Chicago?  Are there Pathing differences between younger vs. older visitors?

In order to see how these different segments navigate your site, you have the following options:

• Create an ASI Segment for the population you care about and look at Pathing reports there
• Utilize Omniture Discover (assuming you have paid for that), create a Segment and view Pathing reports

But what if you don’t have Discover and you don’t want to burn up an ASI segment perpetually for this Pathing Analysis?  The answer is to use Segment Pathing which I will demonstrate here.

An Example: Visitor Type Pathing
In this example, let’s assume that your organization has a cookie that stores (to the best of its ability) the current visitors customer status.  Often times companies assume that a visitor with no cookie value is a “Non-Customer” and those who have logged in or purchased something are “Customers” (obviously this is subject to cookie deletion).  Now let’s assume this this Visitor Type is passed to a SiteCatalyst Traffic Variable on every page.  Obviously, the name of each page is passed on each page and should be set to the s.pagename Traffic Variable.  Therefore, you have Page Name and Visitor Type, but no way to see pages by Visitor Type.  All you have to do is to set a new Traffic Variable (sProp) that concatenates these two values together in a format like this:

[VISITOR TYPE]:[PAGE NAME] or “Customer:Home Page”

If you do this on every page of the site and then have your Account Manager enable Pathing on this new sProp, you now have an intersection between Visitor Type and Page Name on each page and can use any of the many Pathing reports (including Fallout and Pathfinder) for this new variable.  SiteCatalyst experts long ago realized how simply concatenating values together into one SiteCatalyst variable could yield powerful results.  By using this technique, you can now select the appropriate “Visitor Type” concatenated value in the Next Page Flow report to see what “Customers” do on your Home Page:

as compared to “Non-Customers” viewing the same page:

As you can see here, Non-Customers have a much higher exit rate from the Home Page than Customers do, but without the use of this Visitor Type Pathing, it might be difficult to spot this since you are looking at Pathing for all segments lumped together.

Keep in mind, however, that this is just one example of how you can do Segment Pathing.  One of my favorite uses of this technique is to concatenate Campaign Names or Campaign Tracking Codes and Page Name so you can see how visitors from different Campaigns navigated through your site.  In the more advanced version of this shown below, you can see a Pathing Flow for visitors who arrived at a website from a Tracking Code “ggl_1″ and landed on the Video Games page.  By concatenating these two values, we can see how visitors arriving from the “ggl_1″ Campaign Tracking Code navigated the site as compared to those arriving from a different Campaign Tracking Code.  In fact, we can also see how people coming from the same Campaign Tracking Code (i.e. “ggl_1″ navigated the site differently when they arrived on a different page (i.e. a page different than the “Video Games” page).

Note that in the example below, the Campaign Tracking Code is not concatenated with the Page Name on every page, but rather just on the first page.  In this case, this was done because of the massive number of potential Campaign Tracking Code & Page Name combinations, which could lead to a “uniques” issue in SiteCatalyst.  However, the good news is that since Pathing reports only show values that took place after the element before it, by simply selecting the value of “ggl_1:Video Games,” we are guaranteed that all path views after it had to be preceded by the selected value.

Final Thoughts
As you can see the implementation of this through the use of variable concatenation is not terribly difficult.  However, before you run out and concatenate all of your Traffic Variables together, keep in mind the following:

• You do not want to enable Pathing on too many sProps since it will cost you $$$ and could result in report suite latency
• While powerful, this technique is more of a “hack” so if you are going to be doing a lot of segmentation, I encourage you to invest in Omniture Discover which is a much easier way to do Segment Pathing

Adam Greco is the Director of Web Analytics at Salesforce.com.  You can read his previous Inside Omniture SiteCatalyst blog at http://blogs.omniture.com/author/agreco/ and can follow him on Twitter at http://twitter.com/adamgreco.  To be alerted to new blog posts, I recommend subscribing to this blog via e-mail using the tool provided on the top-right of this page.  Please send questions and comments to adam@the-omni-man.com.

Please note: I am no longer an employee of Omniture and the content/views expressed here are my own and not those of Omniture.